High Performance Contact Adhesive – C5100

From: £21.78

High Performance Contact Adhesive C5100 based on polychloroprene rubber. This adhesive is a brushable, general purpose contact adhesive. It bonds a wide variety of materials, and is an ideal contact adhesive for wood, and many other applications.

Product Datasheet: Download PDF

1 0%
2 - 3 5%
4 + 10%

Description

High Performance Contact Adhesive C5100 based on polychloroprene rubber. This adhesive is a brushable, general purpose contact adhesive. It bonds a wide variety of materials, and is an ideal contact adhesive for wood, and many other applications.

Good Heat Resistance

This brushable contact adhesive offers good heat resistance up to 70°C and exhibits excellent adhesion to most surfaces.

Immediate High Contact Bond Strength

The initial bond strength increases appreciably within the next 48 hours and will develop still further in service.

Application uses

C5100 contact adhesive forms a strong permanent contact bond between the following materials / uses:

  • Decorative laminates (e.g. Formica, Warerite, Melamine)
  • Chipboard
  • Plywood
  • Blockboard
  • Hardboard
  • Plasterboard
  • Natural wood veneers
  • Cement
  • Asbestos
  • Rubber
  • Neoprene Rubber
  • Canvas
  • Leather
  • Wood
  • Board
  • Rubber
  • Cement
  • Most plastics
  • Metals
  • Fabrics
  • Woodworking adhesive
  • Interior trimming in the automotive, marine and transportation industries
  • All purpose adhesive for wood, rubber, most plastics, fabrics, cork etc…

Variations

This liquid glue is available in the following sizes:

  • 1 Litre High Performance Contact Adhesive – C5100
  • 5 Litre High Performance Contact Adhesive – C5100

General adhesive attributes

  • General purpose
  • Bonds to a wide variety of materials
  • Easy to apply
  • Short open time

Adhesive information

ColourYellow
Application MethodsBrush, Roller, Spreader
BasePolychloroprene
ConsistencyLiquid
Specific Gravity (20°C)0.845
Total solids19% – 21%
Open Joint Time6 – 25 minutes
Coverage2-3 sq metre per Litre
Heat Resistance70°C
Viscosity4000-5000 cP

Adhesive performance

The performance data presented here are average values that should not be used for specification purposes. Our recommendations on the use of this product are based on tests believed to be reliable.

It is advised that users conduct their own tests to determine the suitability of the product for their specific application.

TestSubstratesResults / Observations
180° Peel TestCloth-backed PVC leather to wood> 20N / 50mm
180° Peel TestCloth-backed PVC leather to painted steel> 20N / 50mm

Handling information

It is advised that users conduct their own tests to determine the suitability of the product for their specific application.

Process StepGuidelines
Surface preparationAll substrates must be clean of any dust, grit, loose material, wax, grease and oil using a suitable cleaner. The materials to be bonded should be dry.
Adhesive applicationTWO-WAY STICK

  1. Stir before use. Using a brush or spreader, apply a thin, even coating of adhesive to both of the surfaces.
  2. Allow the solvent content to evaporate before bonding the materials (touch dry). The time for this evaporation will depend on the temperature and humidity.
  3. Bring the surfaces together (avoid any trapped air bubbles) and apply as much pressure as possible to the whole area. The use of a hand roller is recommended.
CuringThe immediate high contact bond strength increases appreciably within the next 48 hours and will develop still further in service. For the best heat resistance, leave at room temperature for 7 days, before subjecting to high in-service temperatures up to 100°C.
CleaningA suitable cleaner, such as C1013, should be used to remove residues from surfaces.

Precautionary information

  1. C5100 is classified as hazardous according to Directive EC 1272/2008. Please refer to the C5100 Safety Data Sheet for further health & safety information.
  2. Stored in well-sealed containers, C5100 will keep satisfactorily for up to 18 months, from date of manufacture. C5100 must be protected from frost and stored between 5°C – 25°C.

Contact adhesive price

If you buy this liquid contact glue in bulk we offer a discounted rate making it even better value for money.

Not sure if this adhesive is right for your requirements?

If you are not sure if this liquid glue is correct for your requirements please contact us to discuss your requirements and we can point you in the right direction.

Additional information

WeightN/A
Size

1 Litre, 5 Litres

Brand

Bondrite

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

You may also like…